Latest Projects !
important Finishing stages
The first stage
Stone and sand the plaster with stone and mesh until the surface of the wall becomes smooth and free of any cement growths.
The second stage
Paint برا a chemical moisture insulation primer meter under the wall to prevent moisture from reaching the tiles to the walls
The third stage
Lightening and treatment of cracks in the liasa
The fourth stage
Paint برا a chemical moisture insulation primer meter under the wall to prevent moisture from reaching the tiles to the walls
The fifth stage
Base face paint for walls to give strength of cohesion and adhesion to the putty after installation
The sixth stage
Installation of a number of في vitonite putty knife, the first in a longitudinal direction and the second in a transverse direction until the walls are leveled and the fiber defects are treated, if any
The seventh stage
Base face paint until the vitonite paste is isolated and the surface is cleaned of sandpaper dust for the next stage
The eighth stage
Installation of a number ٢ ready-made putty knife to ensure that the walls are completely leveled
The ninth stage
Sand the walls well on the searchlight so that any growths are removed and the surface is finally leveled until it is ready for painting
The tenth stage
Installing face paint liner mechanically or manually
The eleventh stage
Final version No. 2, face paint, finishing according to qualified color
Please feel free to contact us
Do you have Questions?
Please read the questions below and if you can't find your answer, please send us your question, we will get back to you as soon as possible.
Frequently asked questions
Frequently asked questions
Do not hesitate to contact us
We are an organization of lights of the Virgin contracting, specializing in the field of design and project management by engineers and technicians who have the skill, knowledge and professional experience. The execution is carried out with the best quality from design and execution to delivery
1-petrifying and sanding the plaster with stone and mesh until the surface of the wall becomes smooth and free of any cement growths.
هان _paint متر a chemical moisture insulation primer meter under the wall to prevent moisture from reaching the tiles to the walls.
٣-lightening and treatment of cracks in the fiber.
هان-paint برا a chemical moisture insulation primer meter under the wall to prevent moisture from reaching the tiles to the walls.
٥-base face paint for walls so as to give strength of cohesion and adhesion to the putty after installation.
تركيب-installation of a number of في vitonite putty knife, the first in a longitudinal direction and the second in a transverse direction until the walls are leveled and the fiber defects, if any, are treated.
7-paint the base face until the vitonite paste is isolated and clean the surface from sandpaper dust for the next stage.
8-installation of a number ٢ a ready-made putty knife to ensure that the walls are flat once and for all.
9-sanding the walls well on the lighting of the searchlight until any growths are removed and the surface is finally leveled until it is ready for painting.
10-installing a face paint liner mechanically or manually.
11-installation of a number ٢ a final finishing paint face according to the approved color.
Interior and exterior designs
Interior paints
Exterior paints
Paints for iron and wood works
Italian Interior and exterior paints
Decorative paints
Execution of construction works
- Dahab paper
Futek gypsum works
Amaranth paint
Ask us
Because you deserve
still have some questions?
do not hesitate and contact us todaySamples of our works
